1500mm wide product from Rimex USA

The Patterned Finishes are manufactured by cold rolling various metals in sheet and coil format. The patterned product is then levelled and processed for flatness.


Standard dimensions shown are for Stainless Steel (see Forms of Supply).


ROW = Rest of the world reference / USA = USA reference

View all patterns

6WL (ROW) / 6-OM (USA)

Metric - Standards

Widths : 1,000mm & 1,250mm

Gauges : 0.3mm - 3.0mm


USA - Standards

Widths : 36'', 48'' + 60''

Gauges : 0.012'' / 30g

To

Gauges : 0.079'' / 14g

 

 

9EH (ROW) / Leathergrain (USA)

Metric - Standards

Widths : 1,000mm & 1,250mm

Gauges : 0.4mm - 2.0mm


USA - Standards

Widths : 36'', 48'' + 60''

Gauges : 0.016'' / 28g

To

Gauges : 0.079'' / 14g

 

 

5WL (ROW) / 5-SM (USA)

Metric - Standards

Widths : 1,000mm & 1,250mm

Gauges : 0.3mm - 2.0mm


USA - Standards

Widths : 36'', 48'' + 60''

Gauges : 0.012'' / 30g

To

Gauges : 0.079'' / 14g

 

 

TreadTex®

Metric - Standards

Widths : 1,000mm & 1,250mm

Gauges : 0.4mm - 3.0mm


USA - Standards

Widths : 36'', 48'' + 60''

Gauges : 0.016'' / 28g

To

Gauges : 0.118'' / 12g

 

 

Back to top


1500mm Patterned Finishes - Forms of Supply


METALS

Stainless steel: all grades including 304 / 1.4301 . 316 / 1.4401 . 430 / 1.4016 Aluminium: all grades including 1,000, 3,000 and 5,000 series.
Brass, Bronze, Copper, Carbon steels, Galvanised steels, Mild steels and Titanium. OTHER METALS AVAILABLE UPON REQUEST.


FINISHES

Stainless steel: 2B, bright annealed, bead blasted [see Granex™ Finishes], coloured stainless steel [see ColourTex® Finishes] and various polish options [see Other Polished Finishes].
Aluminium: mill, satin, brushed and polished finishes.


LENGTHS

Metric : Standard lengths are 2,000mm, 2,500mm and 3,000mm.

USA : Standard lengths are 96'' and 120''.


NON-STANDARD LENGTHS ARE AVAILABLE UPON REQUEST.




WIDTHS

Metric : Standard widths are 1,000mm, 1,250mm and 1,500mm

USA : Standard widths are 36'', 48'' and 60''.


INDIVIDUAL PATTERN PARAMETERS ARE AS STATED BELOW THE PRODUCT IMAGES. NON-STANDARD SLIT WIDTH REQUIREMENTS ARE AVAILABLE UPON REQUEST.

*PLEASE CHECK GAUGE AND WIDTH COMPATIBILITY BEFORE SPECIFYING OR ORDERING THE 7GM® PRODUCT.

NOTE:


Standard manufacturing parameters are stated throughout this product catalogue. Please enquire for non-standard requirements as these may be possible.


The pattern definition can fall outside normal definition and registration requirements for gauges thicker than 1.5mm (0.060''). Pattern definition will change with thicker gauges and can differ to samples. Pattern definition can also vary with different batch materials and with separate orders.



  • 1. Sample Statement: Samples supplied by Rimex are for promotional purposes only and are not to be used as control materials for goods supplied. If control samples are required for a specific order Rimex needs to be notified in advance.


  • 2. Product Images Statement: Product images are not to scale. They are scaled to give the best visual representation of the product.


  • 3. Promotional Advice and Materials Statement: All data, images, drawings, descriptions and other information furnished by Rimex including verbal information, in or on its website, catalogues, brochures, CD's, pamphlets, price lists, documents or any other promotional media are intended to be as accurate as possible but are given for general information only and are not binding on Rimex in respect of a particular order. All information, unless stated otherwise, is subject to reasonable variations. Rimex does not accept responsibility for errors or information which is found to be misleading. Before using products supplied or manufactured by Rimex, the customer should satisfy itself of their suitability for any required purpose.


  • 4. Protective Tape Statement: Unless ordered to the contrary all material is coated with standard commercial protective tape. No warranty is provided by Rimex as to the suitability of coating used. A copy of appropriate data sheets are available upon request. If a warranty is required the customer should deal direct with a protective tape supplier and notify Rimex of the coating to be used. The use of nonstandard protective tape might be an additional cost to previously quoted prices. Protective tape should be removed as soon as practical and should not be exposed to direct sunlight and temperatures that might cause delamination of adhesive on the coating. The customer is always advised to seek information from the coating manufacturer. Rimex cannot provide information or warranties in respect of protective tapes.


Stainless steel is highly recyclable and typically contains 70% of recycled material. This percentage is increasing. Source: International Stainless Steel Forum.

Back to top